Retro CPC Dongle – Part 37

Tented Vias – who’d have thought they play such an essential role? If you have no idea what tented vias are, then you’re not alone and I’m here to enlighten you.

Sadly, this is not a post documenting success, but another important lessons learned. I mentioned in a previous post that I had tired of my custom hardware failing every time I try to solder the next component to the mainboard, so I opted to work on a development board until most of the RTL was proven, and only then move back to custom hardware. I tried the Cyclone V GX Starter kit, but this was lacking a few features like the USB controller I wanted, and was simply too big. I rapidly switched to the fantastic Terasic DE10-Nano SOC. It had a serial interface, the same ADV7513 video chip as my custom board, SDCard and the same USB PHY. All I needed to add was some memory. The DE10-Nano has two expansion ports, so it’s easy to add a daughter board that provides this memory capability:

DE10 with memory daughter board

Continue reading

Advertisements